Tel: 01252 520229 Email View Models
Home Page
  
This page last updated 24th November 2011

Miscellaneous Items

 

Several items have been posted on this page which are not supplied with pictures at present. If you require further information or pictures of these then please dont hesitate to contact us and we will get pictures or details to you as soon as possible.

5" gauge 'Ride on Railways' short wheelbase,braked riding truck for ground level use with footboards and seat in stained brown finish.

£195.00


5" gauge part built bogie riding truck with aluminium channel section chassis with steel spacers and bogie mounts. The bogies are of similar design to those supplied by REEVES as castings. These are built and fitted to the chassis with some of the braking system made but currently no suspension springs. No seat ,side boards or stirups etc. £145.00


TWO off 5" gauge ten foot radius point kits supplied by MAXITRAK. These are complete with wooden sleepers as supplied and never unpacked £145.00 each. Point levers can also be supplied but these are seperately price at £20.00 each.



TWO off 5" gauge Buffer stop kits as supplied by Maxitrak and still in their packaging, unused and as new. This kits have the wooden sleepers and are priced at £25.00 each



RAIL BENDING TOOL assupplied by PNP railways for use with the other track components A very useful item if you have a need to curve a lot of track,perhaps for a new project. £50.00


Small bench mounting Pillar drill supplied from WICKES with, I believe six speeds. As new and unused, currently with no chuck but this should be available. Untested but substantially complete with single phase motor.£20.00


REXON wood working bands saw,currently missing a blade but this would be available from most power tool stockists. Almost new, as this has only been used on about a dozen occasions, I never got round to buying a replacement blade and have now acquired a bigger machine.£55.00


Metalworking bandsaw similar to the 4.5" universal item supplied by WARCO but not their make. Came from a workshop clearence and is surplus to my requirements. In working order and ready to use. Stand is a little flimsy and therefore difficult to wheel about on those provided. £45.00


TWO 'Record' bench vices one with 4" jaws and the other with 4.5" jaws. The smaller vice is a Record 1ton E Workshop vice and the other is an older No.4 Fitters vice. Both are in sound order with nice parrell jaws and no damaged fixtures £10.00 each


Crompton Parkinson single phase 230-240volt 1HP motor 1425rpm with capacitor fitted. Quite a large motor which is untested but appears to be in working order. Would be suitable to convert a three phase machine to single phase. £25.00


I have three further vehicles which I also need to clear and would make good restoration projest for those who are into road transport and classic cars. I still have two 13/60 Triumph Herald Estate's. One is 1968 and is two owners from new with a fully documented history for all its life including the original bill of sale and trade in certificate. The second is 1970 and was my father's from new and is therefore again only two owners from new. Both have been dry stored for many years and will certainly require restoration work. finally there is a 1974 BMW 2002 saloon in red which has also been dry stored after a period of about 10 years as my regular transport in the 1978-1988 period. there are a number of spares with this car as well as with the Triumphs. If people are interested could they please call me for further information.

 


Pictures of the box and parts in this kit for a Huntsman 31 power boat which I hope will give you more idea what there is available. Please discuss further with me if you are interested and I am sure we can reach an agreement on price I would rather see the kit go to a good home than into the skip!!! which was its destination before I saved it. The tape measue is showing 45.5inches as the overall length of the hull.

 


Radio controlled catamaran, again the servos are fitted and the sails,keel and rudders are available, also the transmitter. Will supply further details to interested parties.

A smaller radio controlled yatch again fully fitted with servo controlled crew of one. Interesting but quiet basic model. Will supply further details to interested parties.