7.25" Project This model is built with Maid of Kent cylinders and has a part built boiler and very small wheels. No plans ,sketch drawings or anything to help with the design £225.00

7.25" gauge Kerr Stuart 'Wren' started many years ago this model requires some careful stripping and bead blasting to clean up the rusted parts before starting further assembly work. The only major component missing is a boiler. Drawings are included with this kit. £1250.00

5" Sweet Pea This loco is quite close to completion and has a new hydraulic certificate on the boiler. The chassis is almost air running and looks to be complete. There is some work to do on the saddle tank and the boiler requires fixtures and fittings. A cab needs to be made and the model will require painting. £1595.00

5" gauge 4-6-4 tank locomotive project. This has been a complete model at one time and I suspect that the boiler failed. A new boiler is provided with this kit which is to LNER design having wheels, boiler, cylinders and motion to the 'Springbok' design. So if you want a large tank loco, this is the one for you. £3250.00

5" Simplex This model has a very well built chassis which runs on air and is basically complete and a boiler which has a hydraulic certificate for the initial test. £1395

5" gauge Outside cylinder 'Maid of Kent' A good start with an almost air running chassis and a professionally built boiler from R.Chambers.£1800.00

5" SIMPLEX Another of this popular model which is being built as an 0-6-2 tank.We are just commissioning the chassis such that it runs on air and will be obtaining a hydraulic test on the boiler. Almost all the platework is complete and a start has been made on preparation for painting. £1750

Pictures to follow

Pictures to follow SOLD

5" SPEEDY This was a complete model which we have run, but a minor repair was required on the boiler. The model was stripped to allow this work to be done. The repair is now complete and tested okay, so the model needs reassembly and final commissioning. Past boiler paperwork and a current hydraulic certificate.£2395

5" gauge 'Speedy' project Most of the major components for this popular LBSC design including a part built boiler which makes this an attractive lot for someone wanting a good project. Not expensive when you see what is there. £700.00

This is almost certainly a pre-war model in need of some one to love it. 5" gauge tank of the 0-4-2 wheel arrangement, the model has outside cylinders and inside slip-eccentric valve gear, which is simple and easy to use. Almost all the model, except the boiler is here, and I am sure someone will have fun with this 5" gauge tank engine. Built to a larger than standard loading gauge so quite a big model. £575.00

3.5" gauge 'Princess Marina' One of several part built models for the LBSC design that I have in stock. this one has a complete boiler and almost complete tender. Some motion work still required £800.00

Typical 'DORIS' except that the model is built with slide valves and we are sure that the motion requires modification to suit this setup. The boiler has been given a hydraulic test and is sound.£1795 SOLD

3.5" GWR Hall Like buses these models sometimes come along in groups. We have two further sets of castings and some machined parts for the GWR Hall and there is one complete boiler which may be serviceable. Might well be a good idea to buy both and make one good model!!! £695.00

Pictures to follow

3.5" Gauge Princess Marina. I have a choice of three partbuilt models at different stages, one of which has no tender. The other two both have tenders and boiler kits. All are on almost complete chassis. Please discuss your requirements with me about this selection.

3.5" ROB ROY Built by the same constructor as the Jubliee tank above and to a similar standard, this model is also nearly complete but the major items are currently disassembled. There is also a stand which allows the model to be turned over for working on. £950

Pictures to follow

Another 3.5" 'Rob Roy' Not a advanced as the model above but also a well built chassis which is close to completion together with smokebox,chimney,dome and a start on the plate work for the cab.£475

2.5" 4-4-0 chassis with all the internal valve gear,cylinder, steam chests and main driving wheels and axles. These are in quite rusty condition but with careful restoration the main items can be salvaged. £125 SOLD

1.5" scale Burrell single crank compound. A well advanced model of this unusual 1.5" scale model,it has a complete boiler with certificate for its initial test. Wheels, gearing, boiler, smokebox horn plates and tender are almost complete and the balance of casting required to complete are available. There is also a full set of drawings which will allow completion of this model. £1395.00

Some of these models come complete with the necessary drawings; others are just the parts and castings and some have boilers or boiler kits included. Further details and prices can be supplied on any of the models on request.
I would consider part exchange against any of these models.